Shaftless Screw Conveyor

Shaftless Screw Conveyor

A shaftless screw conveyor moves dewatered cake with a spiral that has no central shaft, riding on a wear liner inside a U-shaped trough. Without a shaft there is nothing for rags, hair and fibres to wrap around, which is exactly why this design is standard downstream of a dewatering machine: the material is sticky, lumpy and full of stringy contamination. Because the trough is closed by a cover, a shaftless screw conveyor also keeps the cake and its odor inside the equipment instead of on the floor, and it can run horizontally or inclined to reach a skip.

What Is a Shaftless Screw Conveyor?

 

A shaftless screw conveyor moves dewatered cake with a spiral that has no central shaft, riding on a wear liner inside a U-shaped trough. Without a shaft there is nothing for rags, hair and fibres to wrap around, which is exactly why this design is standard downstream of a dewatering machine: the material is sticky, lumpy and full of stringy contamination. Because the trough is closed by a cover, a shaftless screw conveyor also keeps the cake and its odor inside the equipment instead of on the floor, and it can run horizontally or inclined to reach a skip.

 

Working Principle

 

1) Receipt. Cake falls from the dewatering machine outlet through an inlet sized slightly wider than the cake chute, so material cannot bridge at the entry.

2) Conveying. The shaftless spiral, driven through a gear motor and coupling, pushes the cake along the trough; the liner takes the wear, not the trough floor.

3) Inclined transfer. Where the skip is higher than the outlet, the conveyor is inclined - typically up to 30 degrees - with the trough section reduced to keep the fill controlled.

4) Crushing (optional). A cake crusher with rotating blades breaks press cake into uniform lumps, which is what a dryer, an incinerator or a pneumatic line needs.

5) Discharge. Cake leaves through the outlet into a skip, a belt conveyor or a truck loading point, with a drip tray to catch the last of the free water.

6) Control. The conveyor runs interlocked with the dewatering machine, so it starts before the cake arrives and runs on after it stops to clear the trough.

 

Key Features

 

  • Nothing to wrap around - the shaftless spiral handles rags, hair and fibre without the build-up that stalls a shafted screw.
  • Enclosed transfer - a covered U-trough keeps cake and odor inside, which matters in a building where the public or inspectors walk through.
  • Wear liner instead of a worn trough - the replaceable liner takes the abrasion, so the trough itself lasts for the life of the plant.
  • Horizontal or inclined - up to about 30 degrees, so the conveyor can reach a skip without a second transfer point.
  • Cake crusher option - press cake broken to a uniform size for drying, incineration or pneumatic conveying.
  • Interlocked control - starts and stops with the dewatering machine, with a run-on timer to clear the trough.

 

Typical Applications

 

A shaftless screw conveyor is specified wherever dewatered solids have to move a short distance without spillage, without wrapping and without an operator with a shovel:

· dewatered sludge cake· screenings and rags· filter press and belt press cake· biogas residue and digestate fibre· food processing and slaughterhouse waste· paper mill rejects· manure solids· dried or semi-dried cake

 

Selection Guide

 

Shafted screw, shaftless screw or belt - the choice depends on how stringy the material is and how far it has to go:

Criteria

Shaftless screw conveyor

Shafted screw conveyor

Belt conveyor

Stringy material

No wrapping - no shaft

Wraps and stalls

Spill and tracking issues

Length

Up to about 20 m

Up to about 30 m

Long distances

Inclination

Up to about 30°

Up to about 20°

Up to about 25°

Enclosure

Fully covered trough

Covered trough

Open unless covered

Best suited to

Cake, screenings, digestate

Free-flowing granules

Long transfer, multiple outlets

Choose the shaftless shaftless screw conveyor for cake and screenings, where wrapping is the main risk and distances are short. A shafted screw is fine for free-flowing granular product; a belt conveyor makes sense only when the transfer is long or several discharge points are needed.

 

Technical Specifications

 

Size

Spiral dia. (mm)

Capacity (m³/h)

Max length (m)

Max incline

Power (kW)

200

200

1–3

12

30°

1.5–2.2

300

300

3–8

16

30°

2.2–4.0

400

400

8–15

20

30°

4.0–7.5

 

Customization & Options

 

Spiral in 304 stainless or wear-resistant manganese steel; U-trough in carbon steel painted or 304; nylon or UHMWPE liner; variable-length sections; inspection covers; drip tray and drain; cake crusher with hardened blades; belt conveyor alternative with skirted sides; interlocked local control.

 

FAQ

 

Q: Why is a shaftless design better for cake?

Because cake is not a free-flowing material. It is sticky, it compacts, and it carries rags and fibres that wrap a shaft within days. Without a shaft the spiral can tolerate that contamination, and the trough liner takes the abrasion instead of the structure.

Q: How far and how steeply can it convey?

Up to about 20 m and 30 degrees for standard sizes, less for the largest. Beyond that the fill ratio and the torque rise quickly, and a belt conveyor becomes the better answer.

Q: Do I need a cake crusher?

Only if the next process needs uniform lumps - a dryer, an incinerator, a pneumatic transfer line or a mixer. For direct skip disposal, a crusher adds cost without benefit, so we ask what happens to the cake before quoting one.

Q: What wears out?

The liner and, on abrasive cake, the spiral flights. Both are replaceable in sections. Liner thickness is checked annually, and a worn liner is a planned replacement rather than an emergency.

Q: Can it handle screenings from a bar screen?

Yes, and it is often the same machine: screenings are stringier than cake, which is precisely the case the shaftless design was developed for. The trough is usually fitted with a drainage section so free water returns to the channel.

 

Why Jiangsu Shengli Centrifuge

 

Behind this machine is Jiangsu Shengli Centrifuge Manufacturing Co., Ltd.: a 20,000+ m² manufacturing plant, ISO 9001, ISO 14001 and ISO 45001 certification, CE marking, more than 30 patents and installations in over 30 countries. Rotor balancing, wear-facing and final testing are done in house, so the machine that arrives on site is the machine that was measured on the balancing machine, and the report to prove it travels with it.

 

modular-1
Request a Quote or a Free Separation Test

Talk to our engineers with your material data in hand. Send a sample, tell us the throughput you need and the specification you have to meet, and we will come back with a measured result, a recommended model and the operating settings that produced it - not simply the largest machine in the range.

Hot Tags: shaftless screw conveyor, China shaftless screw conveyor manufacturers, suppliers, factory

Send Inquiry